Charger
    Charger
    DescriptionSpesification

    Keep robots running around the clock

    Your MiR100 or MiR200 robot will never run out of power in the middle of a job. MiR Charge 24V is a fully automatic charging station that offers flexible deployment options to meet your needs.

    Collaborates with MiR Fleet

    The robot autonomously returns to the charging station and connects when its battery falls under established limits. It can also be programmed to regularly recharge between deliveries, such as when it returns to a stockroom or depot, which can allow the robot to run nearly continuously. MiR Charge 24V fully charges a MiR robot in about two hours. When multiple robots are deployed using MiR Fleet, the system evaluates battery levels and job loads, optimizing utilization and recharging to keep the fleet on the job around the clock.

    Discreet and easy to install

    MiR Charge 24V is easy and unobtrusive to install in your facility. It uses standard power outlets and its low profile and small footprint give you additional flexibility in how you power and deploy your mobile robot.

    Designated use                                                      Automatic charger for MiR100 and MiR200 robots. The robot moves and connects to the charging                                                        station
    Color                                                      RAL 7035 / Light gray
    Disclaimer                                                      Specifications may vary based on local conditions and application setup
    Width620 mm | 24.4 in
    Height350 mm | 13.8 in
    Depth120 mm | 4.7 in
    Weight10.5 kg | 22 lbs
    Minimum distance between chargers100 mm | 3.9 in if the robot can approach the charger in an angle of 80-100° to the wall
    Wall mounting                                          To be mounted flush with floor 45 mm | 1.8 in from floor to bottom edge
    Output                                       24 V, maximum 25 A
    Input                                       100–240 V AC, 50–60 Hz
    Consumption                                       Nominal 7.3 A at 100 V AC, nominal 2.9 Amp at 240 V AC
    Humidity10–95% non-condensing                                                                                                             
    Ambient temperature range, operation5–40°C | 41–104°F
    Maximum altitude2 000 m | 6 562 ft
    Electrical standardsEN60335-2-29                                                            
    Designated use                                                                                          Automatic charger for MiR100 and MiR200 robots. The robot moves and connects to the charging station
    ColorRAL 7035 / Light gray
    DisclaimerSpecifications may vary based on local conditions and application setup
    Width620 mm | 24.4 in
    Height350 mm | 13.8 in
    Depth120 mm | 4.7 in
    Weight10.5 kg | 22 lbs
    Minimum distance between chargers100 mm | 3.9 in if the robot can approach the charger in an angle of 80-100° to the wall
    Wall mounting                                    To be mounted flush with floor 45 mm | 1.8 in from floor to bottom edge
    Output                                       24 V, maximum 25 A
    Input100–240 V AC, 50–60 Hz
    Consumption                                                                          Nominal 7.3 A at 100 V AC, nominal 2.9 Amp at 240 V AC
    Humidity10–95% non-condensing
    Ambient temperature range, operation5–40°C | 41–104°F
    Maximum altitude2 000 m | 6 562 ft
    Electrical standardsEN60335-2-29