MIR1350
MIR1350 EU Pallet Lift
MIR1350 Pallet Lift
Previous slide
Next slide
MIR1350
MIR1350 EU Pallet Lift
MIR1350 Pallet Lift
Previous slide
Next slide

Quick facts

Max. speed

1.2 m/s (4.3 km/h) | 3.9 ft/s (2.7 mph)

1.2 m/s

Run time

9:50 hours

Payload

2976 lbs

1350 kg

Dimensions

1350 mm x 910 mm

Maximize your efficiency

With a payload of 1350 kg (3000 lbs.), MiR1350 is the most powerful AMR from MiR to date, and it enables you to maximize the efficiency of your logistics operations. You can efficiently move very heavy loads and pallets automatically with the MiR1350.

Automation of pallet transportation

MiR1350 has, with specially designed pallet lifters from MiR, the ability to pick-up, transport and deliver pallets automatically. Thereby, the collaborative robot is a safe alternative to traditional pallet lifters and trucks, which many companies wish to get away from the factory floor, since they often compose a safety risk. At the same time the MiR1350 does not require any operating crew in opposition to the more traditional pallet lifters, and because of this it optimizes the pallet transportation and give the employees time to do more productive tasks.

Efficient and safe navigation optimizes the logistics

The collaborative and autonomous MiR1350 safely maneuvers around all kinds of obstacles and should a person walk directly out in front of it, it will stop. With advanced technology and sophisticated software, the robot can navigate autonomously and choose the most efficient route to its destination. When encountering obstacles, the robot automatically redirects and can reroute in order to prevent stopping or delaying the delivery of materials.

MiR1350 is equipped with the newest laser-scanner technology and has optimal safety with 360 degrees vision around itself. Two 3D cameras in the front enables the robot to see from 30 to 2.000 mm. above the floor, and two sensors in each corner contribute to the robot’s ability to see pallets and other obstacles that are so low that they otherwise can be hard for robots to detect.

The power lies within - a robust robot for industrial use

The MiR1350 is the first IP52 rated AMR on the market. This means that it has enhanced and protected components, so it can withstand dust particles and fluids. The MiR1350 can be used in more environments as it can drive close to open gates or other places where it is exposed to waterdrops and dirt. The MiR1350 is designed to comply with the highest available safety standards - ISO3691-4, making it superior to other AMRs on the market.

Flexibility and user-friendliness increase the applications

The user-friendly MiR1350 gives you full control over and ownership of the robot from the beginning. MiR1350 is operated by the intuitive MiR Robot Interface via smartphone, tablet, or computer and can be programmed based on previous experiences. The robot can be integrated into your ERP-system giving you the opportunity to create fully automatized solutions. Moreover, the robot can be included in the MiR Fleet alongside the rest of MiR’s robots so the different robots can be operated in the same fleet.

According to your need you can quickly and easily change the top modules for the MiR1350, that for example can be equipped with pallet forks, conveyors, a robot arm or other applications.

 

Designated use                              Autonomous mobile robot (AMR) for internal transportation of heavy loads and                                          pallets 
Color                              RAL 9005 / Jet Black
Disclaimer                              Specifications may vary based on local conditions and application setup

 

Length1 350 mm | 53.1 in
Width910 mm | 35.8 in
Height322 mm | 12.7 in
Weight247 kg | 545 lbs
Ground clearance27 mm | 1.0 in
Load surface1 304 x 864 mm | 51.3 x 34 in
Maximum payload                                                1350 kg | 2 976 lbs
           Indicator lights on four sides, eight signal lights (two on each corner)

Maximum speed

                               1.2 m/s (4.3 km/h) | 3.9 ft/s (2.7 mph)
Operational corridor width

                               With default setup: 2 150 mm | 84.6 in

                               With improved setup: 1 200 mm | 47.2 in

Operational corridor width for two robots passing

                               With default setup: 4 250 mm | 167.3 in

                               With minimized footprint and muted Protective fields: 2 700 mm | in 106.3 in

Positioning accuracy (in controlled conditions)

                               Docking to L-marker: ± 3 mmDocking to VL-marker: ± 2 mm | 0.08 in on X-axis, ± 3 mm |                                              0.12 in on  Y-axis, ± 0.25° yaw

Traversable gap tolerance                               Less than 30 mm | 1.18 in

Operational doorway width

                              With improved setup: 750 mm | 29.5 in

                              With default setup: 2 050 mm | 80.7 in

                              With improved setup: 1 200 mm | 47.2 in

Active operation time with maximum payload                              Up to 7 h
Active operation time with no payload                              Up to 10 h
Standby time (robot is on and idle)                              Up to 12 h 30 min
Maximum incline/decline                              ± 1% at 1.2 m/s
Battery type                       Li-NMC, 47.7 V, 34.2 Ah
Charging ratio                       Up to 1:12 (10 min charging gives 2 h runtime with maximum payload)
Charging current                       Up to 35 A
Number of full charging cycles                       Minimum 3 000 cycles
EnvironmentFor indoor use only                                        Fd aasdasd asd ds asd 
Ambient temperature range, operation5–40°C | 41–104°F
Humidity10–95% non-condensing
IP ratingIP 52
Floor conditionsNo water, no oil, no dirt
EMCEN61000-6-2, EN61000-6-4, (EN12895)                          
Safety standards for industrial vehiclesCE, EN1525, ANSI B56.5, ISO3691-4, RIA15.08, ISO13849-1
Safety functions                                                                              12 safety functions according to ISO 13849-1. The robot stops if a safety function is                                                                                                 triggered.
WiFi                                                                     2.4 GHz 802.11 g/n, 5 GHz 802.11 a/n/ac.
I/O connections                                                                     4 digital inputs, 4 digital outputs, 1 Ethernet port with Modbus protocol
SICK safety laser scanners                                                2 pcs, microScan3 (front and rear), give 360° visual protection around the robot
3D cameras

                                                2 pcs, 3D camera Intel RealSense™ D435

                                                FoV height: 1 800 mm | 70.9 in

                                                FoV distance in front of robot: 1 200 mm | 47.2 in

                                                FoV horizontal angle: 114°

                                                FoV minimum distance in front of robot for ground view: 250 mm | 9.8 in

Proximity sensors                                               8 pcs
Audio                                                    Speaker
Signal and status lights                                                    Indicator lights on four sides, eight signal lights (two on each corner)
Designated use
Autonomous mobile robot (AMR) for internal transportation of heavy loads and pallets
Color
RAL 9005 / Jet Black
Disclaimer
Specifications may vary based on local conditions and application setup

 

Length1 350 mm | 53.1 in
Width910 mm | 35.8 in
Height322 mm | 12.7 in
Weight247 kg | 545 lbs
Ground clearance27 mm | 1.0 in
Load surface1 304 x 864 mm | 51.3 x 34 in
Maximum payload                                              1350 kg | 2 976 lbs

Maximum speed

1.2 m/s (4.3 km/h) | 3.9 ft/s (2.7 mph)
Operational corridor width

With default setup: 2 150 mm | 84.6 in

With improved setup: 1 200 mm | 47.2 in

Operational corridor width for two robots passing

With default setup: 4 250 mm | 167.3 in

With minimized footprint and muted Protective fields: 2 700 mm | in 106.3 in

Positioning accuracy (in controlled conditions)

Docking to L-marker: ± 3 mmDocking to VL-marker: ± 2 mm | 0.08 in on X-axis, ± 3 mm | 0.12 in on  Y-axis, ± 0.25° yaw

Traversable gap toleranceLess than 30 mm | 1.18 in

Operational doorway width

With improved setup: 750 mm | 29.5 inWith default setup: 2 050 mm | 80.7 in

With improved setup: 1 200 mm | 47.2 in

Active operation time with maximum payloadUp to 7 h
Active operation time with no payloadUp to 10 h
Standby time (robot is on and idle)Up to 12 h 30 min
Maximum incline/decline± 1% at 1.2 m/s
Battery typeLi-NMC, 47.7 V, 34.2 Ah
Charging ratioUp to 1:12 (10 min charging gives 2 h runtime with maximum payload)
Charging currentUp to 35 A
Number of full charging cyclesMinimum 3 000 cycles
EnvironmentFor indoor use only        
Ambient temperature range, operation5–40°C | 41–104°F
Humidity10–95% non-condensing
IP ratingIP 52
Floor conditionsNo water, no oil, no dirt

 

EMCEN61000-6-2, EN61000-6-4, (EN12895)
Safety standards for industrial vehiclesCE, EN1525, ANSI B56.5, ISO3691-4, RIA15.08, ISO13849-1
Safety functions12 safety functions according to ISO 13849-1. The robot stops if a safety function is triggered.
WiFi2.4 GHz 802.11 g/n, 5 GHz 802.11 a/n/ac.
I/O connections4 digital inputs, 4 digital outputs, 1 Ethernet port with Modbus protocol
SICK safety laser scanners2 pcs, microScan3 (front and rear), give 360° visual protection around the robot
3D cameras2 pcs, 3D camera Intel RealSense™ D435

FoV height: 1 800 mm | 70.9 in

FoV distance in front of robot: 1 200 mm | 47.2 in

FoV horizontal angle: 114°

FoV minimum distance in front of robot for ground view: 250 mm | 9.8 in
Proximity sensors8 pcs
AudioSpeaker
Signal and status lightsIndicator lights on four sides, eight signal lights (two on each corner)
MIR1350 pallet Lift

MIR1350 Custom Pallet

MIR1350 EU Pallet Lift

MIR1350 Pallet Lift

MIR1350 Shelf lift

Smart Pallet Rack

Smart Pallet Station

Jiwa Software

Mir Fleet

Charger

Previous slide
Next slide

Maximize your efficiency

With a payload of 1350 kg (3000 lbs.), MiR1350 is the most powerful AMR from MiR to date, and it enables you to maximize the efficiency of your logistics operations. You can efficiently move very heavy loads and pallets automatically with the MiR1350.

Automation of pallet transportation

MiR1350 has, with specially designed pallet lifters from MiR, the ability to pick-up, transport and deliver pallets automatically. Thereby, the collaborative robot is a safe alternative to traditional pallet lifters and trucks, which many companies wish to get away from the factory floor, since they often compose a safety risk. At the same time the MiR1350 does not require any operating crew in opposition to the more traditional pallet lifters, and because of this it optimizes the pallet transportation and give the employees time to do more productive tasks.

Efficient and safe navigation optimizes the logistics

The collaborative and autonomous MiR1350 safely maneuvers around all kinds of obstacles and should a person walk directly out in front of it, it will stop. With advanced technology and sophisticated software, the robot can navigate autonomously and choose the most efficient route to its destination. When encountering obstacles, the robot automatically redirects and can reroute in order to prevent stopping or delaying the delivery of materials.

MiR1350 is equipped with the newest laser-scanner technology and has optimal safety with 360 degrees vision around itself. Two 3D cameras in the front enables the robot to see from 30 to 2.000 mm. above the floor, and two sensors in each corner contribute to the robot’s ability to see pallets and other obstacles that are so low that they otherwise can be hard for robots to detect.

The power lies within - a robust robot for industrial use

The MiR1350 is the first IP52 rated AMR on the market. This means that it has enhanced and protected components, so it can withstand dust particles and fluids. The MiR1350 can be used in more environments as it can drive close to open gates or other places where it is exposed to waterdrops and dirt. The MiR1350 is designed to comply with the highest available safety standards - ISO3691-4, making it superior to other AMRs on the market.

Flexibility and user-friendliness increase the applications

The user-friendly MiR1350 gives you full control over and ownership of the robot from the beginning. MiR1350 is operated by the intuitive MiR Robot Interface via smartphone, tablet, or computer and can be programmed based on previous experiences. The robot can be integrated into your ERP-system giving you the opportunity to create fully automatized solutions. Moreover, the robot can be included in the MiR Fleet alongside the rest of MiR’s robots so the different robots can be operated in the same fleet.

According to your need you can quickly and easily change the top modules for the MiR1350, that for example can be equipped with pallet forks, conveyors, a robot arm or other applications.

 

Designated use                              Autonomous mobile robot (AMR) for internal transportation of heavy loads and                                          pallets 
Color                              RAL 9005 / Jet Black
Disclaimer                              Specifications may vary based on local conditions and application setup

 

Length1 350 mm | 53.1 in
Width910 mm | 35.8 in
Height322 mm | 12.7 in
Weight247 kg | 545 lbs
Ground clearance27 mm | 1.0 in
Load surface1 304 x 864 mm | 51.3 x 34 in
Maximum payload                                                1350 kg | 2 976 lbs
           Indicator lights on four sides, eight signal lights (two on each corner)

Maximum speed

                               1.2 m/s (4.3 km/h) | 3.9 ft/s (2.7 mph)
Operational corridor width

                               With default setup: 2 150 mm | 84.6 in

                               With improved setup: 1 200 mm | 47.2 in

Operational corridor width for two robots passing

                               With default setup: 4 250 mm | 167.3 in

                               With minimized footprint and muted Protective fields: 2 700 mm | in 106.3 in

Positioning accuracy (in controlled conditions)

                               Docking to L-marker: ± 3 mmDocking to VL-marker: ± 2 mm | 0.08 in on X-axis, ± 3 mm |                                              0.12 in on  Y-axis, ± 0.25° yaw

Traversable gap tolerance                               Less than 30 mm | 1.18 in

Operational doorway width

                              With improved setup: 750 mm | 29.5 in

                              With default setup: 2 050 mm | 80.7 in

                              With improved setup: 1 200 mm | 47.2 in

Active operation time with maximum payload                              Up to 7 h
Active operation time with no payload                              Up to 10 h
Standby time (robot is on and idle)                              Up to 12 h 30 min
Maximum incline/decline                              ± 1% at 1.2 m/s
Battery type                       Li-NMC, 47.7 V, 34.2 Ah
Charging ratio                       Up to 1:12 (10 min charging gives 2 h runtime with maximum payload)
Charging current                       Up to 35 A
Number of full charging cycles                       Minimum 3 000 cycles
EnvironmentFor indoor use only                                        Fd aasdasd asd ds asd 
Ambient temperature range, operation5–40°C | 41–104°F
Humidity10–95% non-condensing
IP ratingIP 52
Floor conditionsNo water, no oil, no dirt
EMCEN61000-6-2, EN61000-6-4, (EN12895)                          
Safety standards for industrial vehiclesCE, EN1525, ANSI B56.5, ISO3691-4, RIA15.08, ISO13849-1
Safety functions                                                                              12 safety functions according to ISO 13849-1. The robot stops if a safety function is                                                                                                 triggered.
WiFi                                                                     2.4 GHz 802.11 g/n, 5 GHz 802.11 a/n/ac.
I/O connections                                                                     4 digital inputs, 4 digital outputs, 1 Ethernet port with Modbus protocol
SICK safety laser scanners                                                2 pcs, microScan3 (front and rear), give 360° visual protection around the robot
3D cameras

                                                2 pcs, 3D camera Intel RealSense™ D435

                                                FoV height: 1 800 mm | 70.9 in

                                                FoV distance in front of robot: 1 200 mm | 47.2 in

                                                FoV horizontal angle: 114°

                                                FoV minimum distance in front of robot for ground view: 250 mm | 9.8 in

Proximity sensors                                               8 pcs
Audio                                                    Speaker
Signal and status lights                                                    Indicator lights on four sides, eight signal lights (two on each corner)
Designated use
Autonomous mobile robot (AMR) for internal transportation of heavy loads and pallets
Color
RAL 9005 / Jet Black
Disclaimer
Specifications may vary based on local conditions and application setup

 

Length1 350 mm | 53.1 in
Width910 mm | 35.8 in
Height322 mm | 12.7 in
Weight247 kg | 545 lbs
Ground clearance27 mm | 1.0 in
Load surface1 304 x 864 mm | 51.3 x 34 in
Maximum payload                                              1350 kg | 2 976 lbs

Maximum speed

1.2 m/s (4.3 km/h) | 3.9 ft/s (2.7 mph)
Operational corridor width

With default setup: 2 150 mm | 84.6 in

With improved setup: 1 200 mm | 47.2 in

Operational corridor width for two robots passing

With default setup: 4 250 mm | 167.3 in

With minimized footprint and muted Protective fields: 2 700 mm | in 106.3 in

Positioning accuracy (in controlled conditions)

Docking to L-marker: ± 3 mmDocking to VL-marker: ± 2 mm | 0.08 in on X-axis, ± 3 mm | 0.12 in on  Y-axis, ± 0.25° yaw

Traversable gap toleranceLess than 30 mm | 1.18 in

Operational doorway width

With improved setup: 750 mm | 29.5 inWith default setup: 2 050 mm | 80.7 in

With improved setup: 1 200 mm | 47.2 in

Active operation time with maximum payloadUp to 7 h
Active operation time with no payloadUp to 10 h
Standby time (robot is on and idle)Up to 12 h 30 min
Maximum incline/decline± 1% at 1.2 m/s
Battery typeLi-NMC, 47.7 V, 34.2 Ah
Charging ratioUp to 1:12 (10 min charging gives 2 h runtime with maximum payload)
Charging currentUp to 35 A
Number of full charging cyclesMinimum 3 000 cycles
EnvironmentFor indoor use only        
Ambient temperature range, operation5–40°C | 41–104°F
Humidity10–95% non-condensing
IP ratingIP 52
Floor conditionsNo water, no oil, no dirt

 

EMCEN61000-6-2, EN61000-6-4, (EN12895)
Safety standards for industrial vehiclesCE, EN1525, ANSI B56.5, ISO3691-4, RIA15.08, ISO13849-1
Safety functions12 safety functions according to ISO 13849-1. The robot stops if a safety function is triggered.
WiFi2.4 GHz 802.11 g/n, 5 GHz 802.11 a/n/ac.
I/O connections4 digital inputs, 4 digital outputs, 1 Ethernet port with Modbus protocol
SICK safety laser scanners2 pcs, microScan3 (front and rear), give 360° visual protection around the robot
3D cameras2 pcs, 3D camera Intel RealSense™ D435

FoV height: 1 800 mm | 70.9 in

FoV distance in front of robot: 1 200 mm | 47.2 in

FoV horizontal angle: 114°

FoV minimum distance in front of robot for ground view: 250 mm | 9.8 in
Proximity sensors8 pcs
AudioSpeaker
Signal and status lightsIndicator lights on four sides, eight signal lights (two on each corner)
MIR1350 pallet Lift

MIR1350 Custom Pallet

MIR1350 EU Pallet Lift

MIR1350 Pallet Lift

MIR1350 Shelf lift

Smart Pallet Rack

Smart Pallet Station

Jiwa Software

Mir Fleet

Charger

Previous slide
Next slide